| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Nozzle holder clamp x Cylinder head cover sub-assembly | 21 | 214 | 15 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| No. 2 camshaft bearing x Cylinder head sub-assembly | 10 | 102 | 7 | |||
| No. 1 camshaft bearing x Cylinder head sub-assembly | 21 | 214 | 15 | |||
| Camshaft timing sprocket x No. 1 camshaft, No. 2 camshaft | 81 | 826 | 60 | |||
| Oil pump relief valve plug x Timing chain cover assembly | 46 | 469 | 34 | |||
| Timing chain guide x Cylinder head sub-assembly | 10 | 102 | 7 | |||
| No. 3 camshaft bearing x Cylinder head sub-assembly | 21 | 214 | 15 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Cylinder head sub-assembly x Cylinder block sub-assembly | for bolt A | 1st | 150 | 1530 | 111 | |
| 2nd | Turn 90° | |||||
| 3rd | Turn 90° | |||||
| for bolt B | 1st | 85 | 867 | 63 | ||
| 2nd | Turn 90° | |||||
| 3rd | Turn 90° | |||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Crankshaft pulley x Crankshaft | 365 | 3722 | 269 | |||
| Crankshaft pulley cover x Crankshaft pulley | 24.5 | 250 | 18 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 1 engine hanger upper x No. 1 engine hanger | 29 | 296 | 21 | ||||
| No. 2 engine hanger x Cylinder head sub-assembly | 26 | 265 | 19 | ||||
| Front engine mounting insulator x Front engine mounting bracket | 64 | 653 | 47 | ||||
| Front engine mounting insulator RH x Front engine mounting insulator | 13 | 133 | 10 | ||||
| Front engine mounting insulator x Body | 42 | 428 | 31 | ||||
| Rear end plate x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Flywheel sub-assembly x Crankshaft | 178 | 1815 | 131 | ||||
| Stud bolt x Compressor mounting bracket | 10 | 102 | 7 | ||||
| Cooler compressor assembly x Compressor mounting bracket | 24.5 | 250 | 18 | ||||
| Suction hose sub-assembly x Water inlet, Timing chain cover | 5.4 | 55 | 48 | ||||
| Vane pump assembly x Generator bracket | 21 | 214 | 15 | ||||
| Battery clamp sub-assembly x Battery clamp bolt | 5.4 | 55 | 48 | ||||
| Engine room main wire x Battery positive cable | 7.1 | 72 | 63 | ||||
| No. 2 engine wire x Body | 14 | 143 | 10 | ||||
| Wire to wire x Engine room relay block sub-assembly | 12.5 | 127 | 9 | ||||
| Intercooler air tube x Diesel throttle body assembly | 6.5 | 66 | 58 | ||||
| No. 4 air hose x No. 2 air tube, Intercooler air tube | 6.5 | 66 | 58 | ||||
| Air cleaner cap and hose x Compressor inlet elbow | 4.0 | 41 | 35 | ||||
| Hood sub-assembly x Hood hinge assembly | 13 | 133 | 10 | ||||
| No. 2 engine cover x Body | 28 | 286 | 21 | ||||
| No. 1 Engine cover assembly x Body | for M6 bolt | 11.5 | 117 | 8 | |||
| for M8 bolt | 28 | 286 | 21 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Timing chain cover sub-assembly | for timing chain cover sub-assembly side | 6.0 | 61 | 53 | |||
| for timing chain case assembly side | 10 | 102 | 7 | ||||
| Lock plate x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| No. 1 camshaft bearing cap x Cylinder head sub-assembly | 21 | 214 | 15 | ||||
| No. 2 camshaft bearing cap x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| No. 3 camshaft bearing cap x Cylinder head sub-assembly | 21 | 214 | 15 | ||||
| Supply pump assembly x Timing chain case assembly | 21 | 214 | 15 | ||||
| No. 1 chain vibration damper x Cylinder block sub-assembly | 21 | 214 | 15 | ||||
| No. 1 chain tensioner assembly x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Supply pump shaft nut x Supply pump shaft | 137 | 1397 | 101 | ||||
| Camshaft timing sprocket x Camshaft | 81 | 826 | 60 | ||||
| Camshaft timing sprocket x No. 2 camshaft | 81 | 826 | 60 | ||||
| No. 2 chain vibration damper x Timing chain case assembly | 21 | 214 | 15 | ||||
| No. 2 chain tensioner slipper x Timing chain case assembly | 21 | 214 | 15 | ||||
| No. 2 chain tensioner assembly x Timing chain case assembly | 10 | 102 | 7 | ||||
| Oil pump relief valve plug x Timing chain cover sub-assembly | 46 | 469 | 34 | ||||
| Rear engine oil seal retainer x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Oil strainer sub-assembly x Cylinder block sub-assembly | 12 | 122 | 9 | ||||
| Crankshaft position sensor harness bracket x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Oil filter bracket x Cylinder block sub-assembly | 21 | 214 | 15 | ||||
| Oil filter union x Oil filter bracket | 29.4 | 300 | 22 | ||||
| Front No. 1 engine mounting bracket RH x Cylinder block sub-assembly | 68 | 693 | 50 | ||||
| Generator bracket sub-assembly x Cylinder head sub-assembly, Timing chain case assembly | 21 | 214 | 15 | ||||
| Front No. 1 engine mounting bracket LH x Cylinder block sub-assembly | 68 | 693 | 50 | ||||
| No. 1 engine hanger x Cylinder head sub-assembly | 26 | 265 | 19 | ||||
| Vacuum pump assembly x Cylinder head sub-assembly | 21 | 214 | 15 | ||||
| No. 1 vacuum transmitting pipe sub-assembly x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Water inlet x Timing chain cover sub-assembly | 13 | 133 | 10 | ||||
| Water outlet sub-assembly x Timing chain cover sub-assembly | 10 | 102 | 7 | ||||
| No. 2 water by-pass pipe sub-assembly x Engine water pump assembly, Water inlet | 10 | 102 | 7 | ||||
| No. 1 water by-pass pipe x Timing chain cover sub-assembly | 10 | 102 | 7 | ||||
| No. 1 compressor mounting bracket x Cylinder block sub-assembly | 39 | 398 | 29 | ||||
| No. 5 water by-pass pipe sub-assembly x Cylinder block sub-assembly | 25 | 255 | 18 | ||||
| No. 3 nozzle leakage pipe x Cylinder block sub-assembly | 21 | 214 | 15 | ||||
| Hose bracket x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Wiring harness clamp bracket x Cylinder head cover sub-assembly | for bolt A | 10 | 102 | 7 | |||
| for bolt B | 8.4 | 86 | 74 | ||||
| No. 2 fuel pipe x Manifold stay | 10 | 102 | 7 | ||||
| No. 4 water by-pass pipe sub-assembly x Intake manifold | 10 | 102 | 7 | ||||
| Stud bolt x Exhaust manifold | 10 | 102 | 7 | ||||
| No. 1 EGR pipe x No. 1 vacuum transmitting pipe sub-assembly, Exhaust manifold | for bolt | 10 | 102 | 7 | |||
| for nut | 29 | 296 | 21 | ||||
| Engine cover bracket x Cylinder head sub-assembly, Hose bracket | 21 | 214 | 15 | ||||
| No. 2 hose to hose tube x Cylinder head cover sub-assembly, Hose bracket | 10 | 102 | 7 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt A x Cylinder head sub-assembly | 6.0 | 61 | 53 | ||||
| Stud bolt B x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt C x Cylinder head sub-assembly | 19 | 194 | 14 | ||||
| Stud bolt D x Cylinder head sub-assembly | 20 | 204 | 15 | ||||
| No. 1 straight screw plug with head x Cylinder head sub-assembly | 25 | 255 | 18 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt A x Cylinder block sub-assembly | 6.0 | 61 | 53 | ||||
| Stud bolt B x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt C x Cylinder block sub-assembly | 19 | 194 | 14 | ||||
| Stud bolt D x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt E x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Cylinder block water drain cock sub-assembly x Cylinder block sub-assembly | 25 | 255 | 18 | ||||
| Cylinder block water drain cock plug x Cylinder water drain cock sub-assembly | 12.7 | 130 | 9 | ||||
| No. 1 oil nozzle sub-assembly x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Crankshaft bearing cap x Cylinder block sub-assembly | 1st | 95 | 969 | 70 | |||
| 2nd | Turn 90° | ||||||
| Connecting rod cap x Connecting rod sub-assembly | 1st | 40 | 408 | 30 | |||
| 2nd | Turn 90° | ||||||