Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › from 2016.01
RM3270E _V1 General _041724 SPECIFICATIONS _0193824 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


Deceleration Sensor (for 4WD and Pre-Runner without VSC)
Tester Connection Switch Condition Specified Condition
1 (GL1) - Battery negative (-) lead Horizontal Approx. 2.25 V
1 (GL1) - Battery negative (-) lead Sensor is tilted forward Approx. 0.45 to 2.25 V
1 (GL1) - Battery negative (-) lead Sensor is tilted rearward Approx. 2.25 to 4.05 V

VSC OFF Switch
Tester Connection Switch Condition Specified Condition
3 - 6 Pressed Below 1 Ω
Not pressed 10 kΩ or higher

Downhill Assist Control Switch
Tester Connection Switch Condition Specified Condition
1 - 4 Pressed Below 1 Ω
Not pressed 10 kΩ or higher