Home › General › SPECIFICATIONS › 1KD-FTV BATTERY / CHARGING › from 2016.01
RM3270E _V1 General _041724 SPECIFICATIONS _0254479 1KD-FTV BATTERY / CHARGING F

SPECIFICATIONS  1KD-FTV BATTERY / CHARGING  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame 2.3 23 20
Generator coil assembly x Generator drive end frame 5.6 57 50
Generator brush holder assembly x Generator coil assembly 1.8 18 16
Generator rear end cover x Generator coil assembly 4.6 47 41
Generator pulley with clutch x Generator rotor assembly without SST 110.5 1127 81
with SST 88.4 901 65
No. 2 idler pulley assembly x Cylinder block 45 459 33
Generator assembly x Cylinder block for bolt A 62 632 46
for bolt B 25 255 18
Generator wire x Terminal B 9.8 100 87
Battery clamp sub-assembly x Battery clamp bolt 5.4 55 48
Positive (+) cable x Positive (+) battery terminal 5.4 55 48
Negative (-) cable x Negative (-) battery terminal 5.4 55 48