Home › General › SPECIFICATIONS › 5L-E FUEL › from 2016.01
RM3270E _V1 General _041724 SPECIFICATIONS _0255947 5L-E FUEL F

SPECIFICATIONS  5L-E FUEL  SERVICE DATA  


FUEL INJECTION PUMP
Item Tester Connection Condition Specified Condition
Engine speed sensor 1 - 2 20°C (68°F) 215 to 245 Ω
Spill control valve 1 - 2 20°C (68°F) 1 to 1.4 Ω
Fuel temperature sensor 1 - 2 20°C (68°F) 2.21 to 2.69 kΩ
Timing control valve assembly 1 - 2 20°C (68°F) 10 to 12.6 Ω

FUEL INJECTION NOZZLE
Standard pressure 16180 to 16770 kPa (165.0 to 171.0 kgf/cm2, 2346 to 2432 psi)

FUEL FILTER
Item Tester Connection Condition Specified Condition
Level warning switch 3 - 4 Float at upper end position Below 1 Ω
Float at lower end position 10 kΩ or higher
Clogging switch 1 - 2 20°C (68°F) Below 1 Ω

FUEL SENDER GAUGE ASSEMBLY
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 4.25 to 4.61 V*
Float position is E (lower) 0.34 to 0.70 V*

*: The output voltage changes depending on the voltage applied to the terminals.