Home › Vehicle Exterior › LIGHTING (EXT) › RELAY › from 2016.01
RM3270E _59 Vehicle Exterior _041720 LIGHTING (EXT) _0199687 RELAY G

LIGHTING (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85926 1.INSPECT HEADLIGHT DIMMER RELAY

a.
E256069N01
2.281,1.146 2.542,1.104 false 2.698,0.708 2.958,0.667 false 2.802,1.219 3,1.115 false 2.635,1.531 2.635,1.375 false 0.281,1.375 0.438,1.573 0.156,0.198 10 1 2.719,1.156 2.948,1.354 0.229,0.198 10 1 1.573,1.375 1.729,1.573 0.156,0.198 10 2 2.563,1.021 2.719,1.219 0.156,0.198 10 2 1.573,0.76 1.729,0.958 0.156,0.198 10 5 2.604,1.229 2.76,1.427 0.156,0.198 10 5 0.292,0.552 0.448,0.75 0.156,0.198 10 3 2.979,0.583 3.135,0.781 0.156,0.198 10 3

Inspect the headlight dimmer relay (DIMMER relay).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the headlight dimmer relay (DIMER relay).



Hide 85916P 2.INSPECT HEADLIGHT RELAY

a.
E256069N01
2.281,1.146 2.542,1.104 false 2.698,0.708 2.958,0.667 false 2.802,1.219 3,1.115 false 2.635,1.531 2.635,1.375 false 0.281,1.375 0.438,1.573 0.156,0.198 10 1 2.719,1.156 2.948,1.354 0.229,0.198 10 1 1.573,1.375 1.729,1.573 0.156,0.198 10 2 2.563,1.021 2.719,1.219 0.156,0.198 10 2 1.573,0.76 1.729,0.958 0.156,0.198 10 5 2.604,1.229 2.76,1.427 0.156,0.198 10 5 0.292,0.552 0.448,0.75 0.156,0.198 10 3 2.979,0.583 3.135,0.781 0.156,0.198 10 3

Inspect the headlight relay (H-LP relay).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the headlight relay (H-LP relay).



Hide 82642A 3.INSPECT RUNNING LIGHT RELAY

a.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Inspect the running light relay (DRL relay).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the running light relay (DRL relay).



Hide 85916D 4.INSPECT FOG LIGHT RELAY

a.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Inspect the fog light relay (FOG FR relay).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the fog light relay (FOG FR relay).



Hide 85916L 5.INSPECT REAR FOG LIGHT RELAY

a.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Inspect the rear fog light relay (FOG RR relay).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the fog light relay (FOG FR relay).



Hide 85916N 6.INSPECT TAILLIGHT RELAY

a.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Inspect the taillight relay (TAIL relay).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the taillight relay (TAIL relay).