Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
1.REMOVE FRONT SEAT ASSEMBLY LH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL
72526E
2.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71812D
3.REMOVE FRONT SEAT CUSHION SHIELD LH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
73240
4.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
71862
5.REMOVE FRONT SEAT INNER CUSHION SHIELD LH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71014S
6.REMOVE FRONT SEAT BACK FRAME SUB-ASSEMBLY LH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
7.REMOVE SEAT CUSHION COVER WITH PAD
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71512S
8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)
Remove the 2 hog rings and disconnect the 2 straps of the separate type front seat cushion cover from the separate type front seat cushion pad.
Remove the 18 hog rings and separate type front seat cushion cover.