Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR › from 2016.01
RM3270E _58 Vehicle Interior _041712 SEAT BELT _0206026 OCCUPANT DETECTION SENSOR A

SEAT BELT  OCCUPANT DETECTION SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for RHD vehicles.



PROCEDURE

Hide 71512S 1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

HINT:
·

Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover when installing the seat cover.

·

As shown in the illustration, fix all of the cover seam allowances in the same direction.

B394024E01
2.5,0.24 3.271,0.438 0.771,0.198 10 false A - A 4.656,0.302 5.427,0.5 0.771,0.198 10 false B - B 0.198,0.396 0.354,0.594 0.156,0.198 10 false A 0.51,0.583 0.656,0.75 0.146,0.167 10 true A 0.938,0.802 1.094,1 0.156,0.198 10 false B 1.26,1.063 1.656,1.406 0.396,0.344 10 false B



a.

Temporarily install the separate type front seat cushion cover to the separate type front seat cushion pad.


b.

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings in the order shown in the illustration.

B405994C01
5.354,1.656 5.25,2.188 false 4.99,0.906 5.115,0.927 true 5.146,2.219 5.458,2.375 0.313,0.156 10 false *1 2.531,1.771 2.76,1.927 0.229,0.156 10 true (1) 5.125,0.823 5.438,0.979 0.313,0.156 10 false *a 2.031,1.76 2.271,1.927 0.24,0.167 10 true (2) 2.479,1.115 2.74,1.333 0.26,0.219 10 true (3) 2.052,1.125 2.302,1.344 0.25,0.219 10 true (4) 1.365,1.833 1.594,2.031 0.229,0.198 10 true (5) 1.469,1.375 1.719,1.604 0.25,0.229 10 true (6) 1.469,1.115 1.688,1.354 0.219,0.24 10 true (7) 1.469,0.813 1.698,1.031 0.229,0.219 10 true (8) 1.469,0.552 1.698,0.74 0.229,0.188 10 true (9) 3.135,1.844 3.427,2.042 0.292,0.198 10 true (10) 3.083,1.385 3.458,1.583 0.375,0.198 10 true (11) 3.073,1.125 3.365,1.344 0.292,0.219 10 true (12) 3.063,0.823 3.385,1.042 0.323,0.219 10 true (13) 3.063,0.563 3.677,0.76 0.615,0.198 10 true (14) 2.74,0.188 3.042,0.385 0.302,0.198 10 true (18) 2.125,0.177 2.448,0.365 0.323,0.188 10 true (16) 1.792,0.188 2.094,0.385 0.302,0.198 10 true (15) 2.427,0.188 2.688,0.396 0.26,0.208 10 true (17)
*1 Hog Ring Pliers - -
*a Cutout - -



c.

Using hog ring pliers, connect the 2 straps of the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.

HINT:
·

Do not dirty or damage the separate type front seatback cover.


·

Securely tighten the hog rings as shown in the illustration while making sure wrinkles do not form in the center of the fabric and separate type front seatback pad.



B405995C01
5.198,1.583 4.885,1.99 false 4.771,2.021 5.083,2.219 0.313,0.198 10 false *1
*1 Hog Ring Pliers - -



Hide 2.INSTALL SEAT CUSHION COVER WITH PAD

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 71014S 3.INSTALL FRONT SEAT BACK FRAME SUB-ASSEMBLY LH

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 71862 4.INSTALL FRONT SEAT INNER CUSHION SHIELD LH

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 73240 5.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

Hide 71812D 6.INSTALL FRONT SEAT CUSHION SHIELD LH

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 72526E 7.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY