Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1GR-FE) › from 2016.08
RM3270E _58 Vehicle Interior _041713 HEATING / AIR CONDITIONING _0234825 COMPRESSOR(for 1GR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GR-FE)  DISASSEMBLY  


PROCEDURE

Hide 88688N 1.REMOVE COOLER BRACKET

a.
E353912

Disconnect the connector.


b.

Detach the clamp.


c.

Remove the screw and cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E341226C01
1.125,0.854 1.125,0.24 1.125,0.24 1.365,0.24 false 1.406,0.156 1.719,0.313 0.313,0.156 10 false *a
*a SST


Clamp the compressor assembly with magnet clutch in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers that are used for adjusting clutch clearance.



d.
E341561

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.
E341562

Using a snap ring expander, remove the snap ring and magnet clutch stator.