OUTLINE
2TR-FE Engine
The 2TR-FE engine is an in-line, 4-cylinder, 2.7-liter, 16-valve DOHC engine. On this engine, the Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i) are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.
| Engine Type | 2TR-FE | |
| Item | No. of Cyls. and Arrangement | 4-cylinder, In-line |
| Valve Mechanism | 16-valve DOHC, Chain Drive (with VVT-i) | |
| Displacement | 2694 cm3 (164.4 cu. in.) | |
| Max. Output [SAE-NET] | 118 kW @ 5200 rpm | |
| Max. Torque [SAE-NET] | 241 N*m @ 3800 rpm | |
Automatic Transmission
A343E 4-speed automatic transmission is used.
Manual Transmission
R150 5-speed manual transmission is used.
Suspension
A double-wishbone type independent suspension is used for the front.
A 4-link coil spring with lateral control rod type rigid axle suspension is used for the rear.
Brake
The Anti-lock Brake System (ABS) is used.
Steering
A rack and pinion type steering gear is used.
A hydraulic power steering is used.
A manual tilt mechanism is used.