Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › ENGINE UNIT
NM1880E _51 Engine / Hybrid System _015471 2TR-FE ENGINE MECHANICAL _0076895 ENGINE UNIT DE DETAILS F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  BALANCE SHAFT  


CONSTRUCTION


a.

For in-line 4-cylinder engines, the main cause of vibration is imbalanced inertial force of reciprocating parts such as the pistons and connecting rods. The engine vibration has been reduced by using 2 balance shafts to cancel the imbalanced inertial force, thereby reducing engine noise (booming noise).


b.

The 2 balance shafts are built into the cylinder block. Using a chain, sprockets and gears, both balance shafts rotate at twice the speed of the crankshaft with each balance shaft rotating in the opposite direction of the other.


c.

The chain tensioner uses a spring and oil pressure to maintain proper chain tension at all times. A ratchet type non-return mechanism is also included.


d.

The chain tensioner has 2 oil holes that spray engine oil for lubricating the balance shaft chain. Furthermore, they lubricate the timing chain that drives the camshaft.

W102959
2.302,0.823 2.594,0.667 2.594,0.667 2.771,0.667 true 1.646,1.125 1.375,1.417 1.375,1.417 0.823,1.417 true 1.438,0.542 1.01,0.156 1.01,0.156 0.833,0.156 true 1.333,0.635 1,0.458 1,0.458 0.833,0.458 true 1.219,0.854 1.01,0.75 1.01,0.75 0.844,0.75 true 1.5,1.083 1.01,1.073 1.01,1.073 0.854,1.073 true 1.198,2.198 0.927,1.969 0.927,1.969 0.792,1.969 true 1.146,2.74 0.854,2.938 0.854,2.938 0.708,2.938 true 1.625,3.438 0.833,3.615 0.833,3.615 0.708,3.615 true 2.208,2.604 2.854,2.031 2.854,2.031 3.031,2.031 true 2.49,2.573 2.906,2.427 2.906,2.427 3.031,2.427 true 2.521,2.771 2.979,2.771 true 5.979,2.125 5.979,0.5 5.979,0.5 5.031,0.5 true 5.281,1.906 5.281,0.5 true 2.802,0.563 3.01,0.76 0.208,0.198 10 false *1 0.677,0.063 0.885,0.26 0.208,0.198 10 false *2 0.677,0.354 0.885,0.552 0.208,0.198 10 false *3 0.688,0.656 0.896,0.854 0.208,0.198 10 false *4 0.677,0.979 0.885,1.177 0.208,0.198 10 false *5 0.625,1.885 0.833,2.083 0.208,0.198 10 false *6 0.552,2.854 0.76,3.052 0.208,0.198 10 false *7 0.542,3.521 0.75,3.719 0.208,0.198 10 false *8 3.052,1.927 3.26,2.125 0.208,0.198 10 false *9 3.073,2.344 3.375,2.542 0.302,0.198 10 false *10 4.771,0.406 5.094,0.615 0.323,0.208 10 false *12 3,2.698 3.323,2.896 0.323,0.198 10 false *11 0.677,1.292 0.885,1.49 0.208,0.198 10 false *5
*1 Spring *2 Cam Spring
*3 Cam *4 Plunger
*5 Oil Hole *6 Balance Shaft Drive Gear
*7 Balance Shaft Driven Gear *8 Crankshaft Timing Sprocket
*9 Chain Tensioner *10 Balance Shaft Timing Sprocket
*11 Balance Shaft Chain *12 Balance Shaft
V100136

Engine Oil - -




OPERATION


a.

In the in-line 4-cylinder engine, the crankshaft angles for No. 1 and No. 4 cylinders are at the exact opposite (180°) positions of No. 2 and No. 3 cylinders. Therefore, the inertial force of the pistons and the connecting rods of the former 2 cylinders and of the latter 2 cylinders almost cancel each other out. However, because the position at which the piston reaches its maximum speed is located toward the top dead center from the center of the stroke, the upward inertial force is greater than the downward inertial force. This unbalanced secondary inertial force is generated twice for each rotation of the crankshaft.

W100394
3.092,1.845 2.812,1.63 2.812,1.63 2.663,1.63 false 3.214,1.556 3.111,1.051 3.111,1.051 2.887,1.051 false 4.101,1.845 4.4,1.677 4.4,1.677 4.577,1.677 false 3.592,1.304 3.956,0.986 3.956,0.986 4.143,0.986 false 3.592,0.622 3.779,0.444 3.779,0.444 3.928,0.444 false 3.592,0.276 3.76,0.117 3.76,0.117 3.919,0.117 false 3.956,0.047 5.372,0.333 1.416,0.286 10 Top Dead Center 3.97,0.369 5.386,0.655 1.416,0.286 10 Point of Max. Speed 4.171,0.921 5.587,1.206 1.416,0.286 10 Bottom Dead Center 4.619,1.602 6.035,1.888 1.416,0.286 10 Point of Max. Speed 1.364,1.556 2.78,1.842 1.416,0.286 10 Point of Max. Speed 2.635,0.977 2.893,1.262 0.258,0.286 10 90°

W100395
2.229,0.958 2.417,0.958 2.417,0.958 2.646,1.458 true 2.646,1.927 2.385,1.677 2.385,1.677 2.26,1.677 true 3.573,1.542 3.802,0.969 3.802,0.969 3.938,0.969 true 3.844,1.969 3.844,1.396 3.844,1.396 3.979,1.396 true 3.521,1.344 3.333,1.021 3.333,1.021 3.208,1.021 true 3.219,1.938 3.219,1.313 3.219,1.313 3.063,1.313 true 4.99,1.969 4.99,1.396 4.99,1.396 5.156,1.396 true 2.688,2.896 2.469,3.063 2.469,3.063 2.292,3.063 true 0.563,0.875 2.198,1.479 1.635,0.604 10 false Inertial Force of No. 2 and No. 3 Cylinders 0.104,1.594 2.188,2.542 2.083,0.948 10 false Combined Inertial Force of All Cylinders (Unbalanced Secondary Inertial Force) 0.625,2.969 2.26,3.563 1.635,0.594 10 false Inertial Force of No. 1 and No. 4 Cylinders 2.49,2.26 2.844,2.438 0.354,0.177 10 false -180° 3.563,2.219 3.719,2.396 0.156,0.177 10 false 0° 4.281,2.219 4.583,2.396 0.302,0.177 10 false 180° 2.823,1.24 3.094,1.417 0.271,0.177 10 false -90° 4.01,1.302 4.24,1.479 0.229,0.177 10 false 90° 5.198,1.313 5.5,1.49 0.302,0.177 10 false 270° 3.979,0.854 6.771,1.198 2.792,0.344 10 false Inertial Force that Cannot be Canceled 2.813,0.927 3.188,1.104 0.375,0.177 10 false Force 0.156,0.146 3.052,0.479 2.896,0.333 10 false Inertial Force Generated by 4 In-line Cylinders 5.406,2.115 6.49,2.51 1.083,0.396 10 false Crankshaft Angle


b.

To cancel the unbalanced secondary inertial force, 2 balance shafts are rotated twice for each rotation of the crankshaft and generate inertial force in the opposite direction. Also, in order to cancel the inertial force generated by the balance shaft itself, the balance shaft actually consists of 2 shafts rotating in opposite directions.

W100396
2.823,1.125 2.594,0.833 2.594,0.833 2.448,0.833 true 3.458,1.115 3.25,0.5 3.25,0.5 3.115,0.5 true 4.115,1.104 3.906,0.5 3.906,0.5 3.771,0.5 true 4.76,1.104 4.552,0.5 4.552,0.5 4.417,0.5 true 4.917,0.802 5.021,0.479 5.021,0.479 5.156,0.479 true 5.302,2.854 5.49,2.052 5.49,2.052 5.698,2.052 true 5.146,3.031 5.719,3.031 true 4.948,1.406 5.094,1.625 5.094,1.625 5.198,1.625 true 2.323,0.75 2.479,0.927 0.156,0.177 10 false 0° 3.51,0.417 3.813,0.594 0.302,0.177 10 false 180° 2.948,0.365 3.177,0.542 0.229,0.177 10 false 90° 4.146,0.406 4.448,0.583 0.302,0.177 10 false 270° 2.74,1.219 2.896,1.396 0.156,0.177 10 false A 3.083,1.219 3.24,1.396 0.156,0.177 10 false B 3.417,1.198 3.573,1.375 0.156,0.177 10 false C 3.771,1.229 3.927,1.406 0.156,0.177 10 false D 4.083,1.188 4.24,1.365 0.156,0.177 10 false E 0.188,0.083 3.688,0.375 3.5,0.292 10 false Mass Direction of Balance Shaft at Crankshaft Angle 5.219,0.385 7.146,0.76 1.927,0.375 10 false Inertial Force of Balancer 5.25,1.042 6.865,1.323 1.615,0.281 10 false Crankshaft Angle 5.26,1.531 7.01,1.896 1.75,0.365 10 false Secondary Inertial Force 5.75,1.948 6.854,2.615 1.104,0.667 10 false Mass Direction of Balance Shaft 5.792,2.896 6.792,3.583 1,0.688 10 false Inertial Force of Balancer