Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM
NM1880E _51 Engine / Hybrid System _015473 2TR-FE EMISSION CONTROL _0076897 EMISSION CONTROL SYSTEM CO CONTROL F

2TR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the emission control system are as follows:

Component Function
Exhaust Emission System ECM Determines an optimal fuel injection volume based on the signals from various sensors.
TWC Reduces CO, HC and NOx in the exhaust gas.
Oxygen Sensor Detects the oxygen concentration in the exhaust emissions by measuring the electromotive force generated in the sensor itself. For details, see the 2TR-FE Engine Control.
Evaporative Emission Control ECM Sends signals to the VSV (for EVAP) to control the purge flow.
Charcoal Canister Sub-assembly Contains activated charcoal to absorb the fuel vapor created in the fuel tank.
VSV (for EVAP) Opens in accordance with the signals from the ECM when the system is purging, in order to send the fuel vapor that was absorbed by the charcoal canister into the intake manifold.