CONSTRUCTION
The shift solenoid valves S1 and S2 are 2-way solenoid valves.
A filter is provided at the tip of each solenoid valve to further improve operational reliability.
| *1 | Filter | - | - |
|
Line Pressure |
|
Control Pressure |
| Shift Solenoid Valve | Function |
|---|---|
| S1 | Switches the 2-3 shift valve. |
| S2 | Switches the 1-2 shift valve and the 3-4 shift valve. |
In order to provide a hydraulic pressure that is proportional to the current that flows to the solenoid coil, the shift solenoid valve SLT linearly controls the line pressure based on the signals it receives from the ECM.
The shift solenoid valve SL is a 2-way solenoid valve.
A filter is provided at the tip of the solenoid valve to further improve operational reliability.
| *1 | Filter | - | - |
|
Line Pressure |
|
Control Pressure |
| Shift Solenoid Valve | Function |
|---|---|
| SLT | ·
Line pressure control ·
Accumulator back pressure control |
| SL | ·
Lock-up clutch pressure control ·
Accumulator back pressure control |