Home › Drivetrain › CLUTCH › CLUTCH SYSTEM
NM1880E _52 Drivetrain _015480 CLUTCH _0076906 CLUTCH SYSTEM GE GENERAL F

CLUTCH  CLUTCH SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A dry type single plate clutch, operated by hydraulic pressure, is used, which is matched to the performance of each engine.


b.

A clutch disc assembly that uses an organic solvent-free material is used to help protect the environment. In addition, the components of the clutch damper have been optimized to achieve wear resistance and reduce noise and vibration.



SPECIFICATION


Clutch Type Dry Type
Single Plate Clutch
Diaphragm Spring
Operation Hydraulic
Clutch Cover Size 250 mm (9.84 in.)
Installed Load 5900 N
Clutch Disc Facing Size* 250 mm x 160 mm (9.84 in. x 6.30 in.)
Master Cylinder Type Plunger
Release Cylinder Type Non-adjustable
Clutch Pedal Conventional
Clutch Accumulator Without

HINT:

*: Outer diameter x Inner diameter