CONSTRUCTION
The brake actuator assembly consists of an actuator portion and skid control ECU.
| *1 | Skid Control ECU | *2 | Actuator Portion |
The actuator portion consists of 3 pressure holding solenoid valves, 3 pressure reduction solenoid valves, 2 pumps and 2 reservoirs.
| *1 | Pressure Holding Solenoid Valve | *2 | Pressure Reduction Solenoid Valve |
| *3 | Pump | *4 | Reservoir |
| *5 | Brake Control Valve | - | - |
| *a | From Master Cylinder | *b | Front Brake LH |
| *c | Front Brake RH | *d | Rear Brake LH |
| *e | Rear Brake RH | - | - |