Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM
NM1880E _58 Vehicle Interior _015495 DOOR LOCK _0076923 WIRELESS DOOR LOCK CONTROL SYSTEM CO CONTROL F

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  CONTROL  WIRELESS DOOR LOCK CONTROL  


FUNCTION


a.

The wireless door lock control system has the following functions:

Function Outline Without Theft Deterrent System With Theft Deterrent System
All Doors Lock Pressing the lock button of the transmitter locks all the doors and the back door. X X
All Doors Unlock Pressing the unlock button of the transmitter unlocks all the doors and the back door. X X
All Doors Unlock (2-step Unlock) Pressing the unlock button on the transmitter once unlocks the driver door, and pressing it again within 3 seconds unlocks all the doors. - X
Automatic Lock If none of the doors are opened for 30 seconds after being unlocked by the wireless door lock control system, all the doors are locked again automatically. X X
Answer Back
·

The hazard lights flash once during locking and flash twice during unlocking to inform the driver that the operation has been completed.

·

This function can be enabled and disabled in accordance with the user's preference. For details, refer to the corresponding Repair Manual for this model.


- X
The hazard lights flash once during locking and flash twice during unlocking to inform the driver that the operation has been completed. X -
·

The security horn assembly sounds once when locking and twice when unlocking to inform the driver that the operation has been completed. This function is not active in the default setting.

·

This function can be enabled and disabled in accordance with the user's preference. For details, refer to the corresponding Repair Manual for this model.


- X
Panic Alarm Pressing the panic button on the transmitter for 1.5 seconds or more operates the theft deterrent system alarm for 30 seconds. The alarm can be canceled by pressing any button other than the panic button. - X
Door Ajar Warning
·

If any door is open or ajar, pressing the lock button on the transmitter will cause the security horn assembly to sound for approx. 1 second.

·

This function can be enabled and disabled in accordance with the user's preference. For details, refer to the corresponding Repair Manual for this model.


- X

HINT:

X: Available

-: Not available




DIAGNOSIS


a.

If there is a malfunction in the system, the No. 1 integration relay stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the corresponding Repair Manual for this model.