CONSTRUCTION
A semi-center location air conditioning unit is used, in which the evaporator and heater radiator are placed in the vehicle's longitudinal direction. As a result, the air conditioning unit has been made compact and lightweight.
| *1 | Heater Radiator Unit Sub-assembly | *2 | No. 1 Cooler Evaporator Sub-assembly |
| *a | Front | - | - |
A partial recirculation system is used. This system has an air inlet control door (sub) in the air inlet duct. Thus, it is able to cycle a small volume of recirculated air even in the FRESH mode, thus enhancing heating performance. When the blower switch is on, the suction force of the blower fan opens this air inlet control door (sub).
| *1 | Air Inlet Control Door | *2 | Air Inlet Control Door (Sub) |
| *a | Fresh Air | *b | Recirculated Air |