Home › General › SPECIFICATIONS › 2TR-FE COOLING
RM1880E _V1 General _013207 SPECIFICATIONS _0068400 2TR-FE COOLING F

SPECIFICATIONS  2TR-FE COOLING  SERVICE DATA  


THERMOSTAT
Condition Specified Condition
Standard valve opening temperature 80 to 84°C (176 to 183°F)
Standard valve lift 8.5 mm (0.335 in.) or more at 95°C (203°F)

RADIATOR RESERVOIR CAP
Item Specified Condition
Standard value
(for brand-new cap)
93 to 123 kPa (1.0 to 1.3 kgf/cm2, 13.5 to 18 psi)
Minimum standard value
(for used cap)
79 kPa (0.8 kgf/cm2, 11.4 psi)

FIN FOR BLOCKAGE
Item Injection Pressure Specified Condition
Fin for blockage 2942 to 4903 kPa (30.0 to 50.0 kgf/cm2, 427 to 711 psi) 300 mm (11.8 in.)
4903 to 7845 kPa (50.0 to 80.0 kgf/cm2, 711 to 1138 psi) 500 mm (19.7 in.)

COOLANT
Item Capacity Classification
Engine Coolant
for Automatic Transmission
8.1 liters (8.6 US qts, 7.1 Imp. qts) Use only TOYOTA SLLC or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids).
Engine Coolant
for Manual Transmission
7.8 liters (8.2 US qts, 6.9 Imp. qts)