Home › General › SPECIFICATIONS › ALIGNMENT / HANDLING DIAGNOSIS
RM1880E _V1 General _013207 SPECIFICATIONS _0068424 ALIGNMENT / HANDLING DIAGNOSIS F

SPECIFICATIONS  ALIGNMENT / HANDLING DIAGNOSIS  SERVICE DATA  


Standard Vehicle Height (for Unloaded Vehicle)
Vehicle Model Front A - B Rear C - D
TGN41L-GKMDKV 82 mm (3.23 in.) 41 mm (1.61 in.)
TGN41L-GKMNKV 82 mm (3.23 in.) 41 mm (1.61 in.)
TGN41L-GKPDKV 84 mm (3.31 in.) 43 mm (1.69 in.)
TGN41L-GKPNKV 84 mm (3.31 in.) 43 mm (1.69 in.)
TGN41R-GKMNKN 83 mm (3.27 in.) 41 mm (1.61 in.)

Standard Camber Inclination (for Unloaded Vehicle)
Vehicle Model Camber Inclination
TGN41L-GKMDKV
Right-left error
0°8' +/-30' (0.13° +/-0.50°)
30' (0.50°) or less
TGN41L-GKMNKV
Right-left error
0°8' +/-30' (0.13° +/-0.50°)
30' (0.50°) or less
TGN41L-GKPDKV
Right-left error
0°5' +/-30' (0.08° +/-0.50°)
30' (0.50°) or less
TGN41L-GKPNKV
Right-left error
0°5' +/-30' (0.08° +/-0.50°)
30' (0.50°) or less
TGN41R-GKMNKN
Right-left error
0°7' +/-30' (0.12° +/-0.50°)
30' (0.50°) or less

Standard Caster Inclination (for Unloaded Vehicle)
Vehicle Model Caster Inclination
TGN41L-GKMDKV
Right-left error
3°18' +/-30' (3.30° +/-0.50°)
30' (0.50°) or less
TGN41L-GKMNKV
Right-left error
3°18' +/-30' (3.30° +/-0.50°)
30' (0.50°) or less
TGN41L-GKPDKV
Right-left error
3°21' +/-30' (3.35° +/-0.50°)
30' (0.50°) or less
TGN41L-GKPNKV
Right-left error
3°21' +/-30' (3.35° +/-0.50°)
30' (0.50°) or less
TGN41R-GKMNKN
Right-left error
3°19' +/-30' (3.32° +/-0.50°)
30' (0.50°) or less

Standard Steering Axis Inclination (for Unloaded Vehicle)
Vehicle Model Steering Axis Inclination
TGN41L-GKMDKV
Right-left error
10°47' +/-30' (10.78° +/-0.50°)
30' (0.50°) or less
TGN41L-GKMNKV
Right-left error
10°47' +/-30' (10.78° +/-0.50°)
30' (0.50°) or less
TGN41L-GKPDKV
Right-left error
10°49' +/-30' (10.82° +/-0.50°)
30' (0.50°) or less
TGN41L-GKPNKV
Right-left error
10°49' +/-30' (10.82° +/-0.50°)
30' (0.50°) or less
TGN41R-GKMNKN
Right-left error
10°47' +/-30' (10.78° +/-0.50°)
30' (0.50°) or less

Standard Toe-in (Unloaded Vehicle)
Vehicle Model A + B
C - D
TGN41L-GKMDKV A + B: 0°4' +/-5' (0.07° +/-0.09°)
C - D: 1.5 +/-1.0 mm (0.06 +/-0.04 in.)
TGN41L-GKMNKV A + B: 0°4' +/-5' (0.07° +/-0.09°)
C - D: 1.5 +/-1.0 mm (0.06 +/-0.04 in.)
TGN41L-GKPDKV A + B: 0°4' +/-5' (0.06° +/-0.09°)
C - D: 1.3 +/-1.0 mm (0.05 +/-0.04 in.)
TGN41L-GKPNKV A + B: 0°4' +/-5' (0.06° +/-0.09°)
C - D: 1.3 +/-1.0 mm (0.05 +/-0.04 in.)
TGN41R-GKMNKN A + B: 0°4' +/-5' (0.07° +/-0.09°)
C - D: 1.4 +/-1.0 mm (0.06 +/-0.04 in.)

Standard Wheel Angle (for Unloaded Vehicle)
Inside Wheel Angle Outside Wheel Angle (Reference)
39°48' (37°48' to 40°48')
(39.8° (37.8° to 40.8°))
33°30' (33.5°)