Home › General › SPECIFICATIONS › POWER ASSIST SYSTEMS
RM1880E _V1 General _013207 SPECIFICATIONS _0068434 POWER ASSIST SYSTEMS F

SPECIFICATIONS  POWER ASSIST SYSTEMS  SERVICE DATA  


Power Steering Fluid
Fluid level rise (Maximum) 5 mm (0.197 in.)
Fluid pressure at idle speed with valve closed 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2, 1276 to 1348 psi)

Vane Pump
Vane pump shaft and vane pump housing oil clearance (Maximum) 0.07 mm (0.00276 in.)
Clearance between the vane pump rotor groove and vane pump plate (Maximum) 0.03 mm (0.00118 in.)
Compression spring free length (Minimum) 29.2 mm (1.15 in.)
Vane pump rotating torque 0.27 N*m (2 kgf*cm, 2 in.*lbf) or less

LUBRICANT
Power Steering Fluid "TEXAMATIC 1888" or equivalent