1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
| *a | Component without harness connected
(Throttle Body with Motor) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (M+) - 1 (M-) | 20°C (68°F) | 0.3 to 100 Ω |
| 5 (VC) - 3 (E2) | 20°C (68°F) | 1.2 to 3.2 kΩ |
If the result is not as specified, replace the throttle body with motor assembly.