Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM1880E _51 Engine / Hybrid System _013209 2TR-FE ENGINE CONTROL _0068454 CAMSHAFT POSITION SENSOR A

2TR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CAMSHAFT POSITION SENSOR

a.
A301634
1.604,0.917 1.917,0.385 1.917,0.385 2.115,0.385 false 2.167,0.292 2.479,0.448 0.313,0.156 10 false *1
*1 O-Ring


Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:

Make sure that the O-ring is not cracked or jammed when installing the sensor.



c.

Connect the camshaft position sensor connector.