Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › CYLINDER HEAD › 2011.07–2014.08
RM1880E _51 Engine / Hybrid System _013210 2TR-FE ENGINE MECHANICAL _0068472 CYLINDER HEAD A

2TR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE INTAKE VALVE

a.
A101369
1.75,0.854 1.656,0.135 1.656,0.135 1.573,0.135 true 1.25,0.063 1.719,0.313 0.469,0.25 10 false SST

Using SST and wooden blocks, compress the compression spring and remove the valve retainer locks.

SST
09202-70020  (09202-00010)


b.

Remove the retainer, compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 2.REMOVE EXHAUST VALVE

a.
A101370
0.688,0.427 0.99,0.115 0.99,0.115 1.125,0.115 false 1.188,0.031 1.646,0.313 0.458,0.281 10 false SST

Using SST and wooden blocks, compress the compression spring and remove the valve retainer locks.

SST
09202-70020  (09202-00010)


b.

Remove the retainer, compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 3.REMOVE VALVE STEM OIL SEAL

a.

Using needle-nose pliers, remove the 16 oil seals.


Hide 4.REMOVE VALVE SPRING SEAT

a.

Remove the 16 valve spring seats from the cylinder head.


Hide 5.REMOVE NO. 1 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101373

If coolant leaks from a No. 1 head straight screw plug or a plug is corroded, replace it.


a.

Using a 10 mm hexagon wrench, remove the 3 screw plugs and 3 gaskets.


Hide 6.REMOVE NO. 2 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101374

If coolant leaks from the No. 2 head straight screw plug or the plug is corroded, replace it.


a.

Using a 19 mm hexagon wrench, remove the screw plug and gasket.


Hide 7.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.