Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › CYLINDER HEAD
RM1880E _51 Engine / Hybrid System _013210 2TR-FE ENGINE MECHANICAL _0068472 CYLINDER HEAD A

2TR-FE ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the intake valve seat smooth.



a.
A110502
2.438,1.802 2.677,2 0.24,0.198 10 false *1 2.375,0.354 2.656,0.552 0.281,0.198 10 false 45° 3.01,0.927 3.271,1.083 0.26,0.156 10 false 30°
*1 Width


If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.


b.
A101380
2.427,1.948 2.646,2.125 0.219,0.177 10 false *1 2.208,0.479 2.49,0.688 0.281,0.208 10 false 60° 2.938,1.083 3.198,1.26 0.26,0.177 10 false 45°
*1 Width


If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.


c.

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.

Standard width:

1.1 to 1.4 mm (0.0433 to 0.0551 in.)



Hide 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the exhaust valve seat smooth.



a.
A110502
2.458,1.792 2.698,1.99 0.24,0.198 10 false *1 2.469,0.375 2.75,0.573 0.281,0.198 10 false 45° 3.021,0.938 3.281,1.094 0.26,0.156 10 false 30°
*1 Width


If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.


b.
A101380
2.427,1.958 2.646,2.135 0.219,0.177 10 false *1 2.24,0.479 2.469,0.646 0.229,0.167 10 false 60° 2.938,1.052 3.198,1.229 0.26,0.177 10 false 45°
*1 Width


If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.


c.

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.

Standard width:

1.1 to 1.4 mm (0.0433 to 0.0551 in.)