Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › PCV VALVE
RM1880E _51 Engine / Hybrid System _013212 2TR-FE EMISSION CONTROL _0068486 PCV VALVE G

2TR-FE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 1.INSPECT PCV VALVE SUB-ASSEMBLY

a.

Install a clean hose to the PCV valve sub-assembly.


b.
A253118
2.615,0.469 2.469,0.469 2.469,0.469 1.979,0.969 false 2.667,0.354 3,0.667 0.333,0.313 10 false *1
*1 Clean Hose
V100135

Air


Check the PCV valve operation.

i.

Blow air into the cylinder head side, and check that air passes through easily.

CAUTION:

Do not suck air through the valve. Petroleum substances inside the valve are hazardous to your health.



ii.
A253119
1.104,1.646 1.229,1.646 1.229,1.646 1.542,1.198 false 0.865,1.542 1.135,1.74 0.271,0.198 10 false *1
*1 Clean Hose
V100135

Air


Blow air into the intake manifold side and check that air passes through with difficulty.

If the result is not as specified, replace the PCV valve sub-assembly.



c.

Remove the clean hose from the PCV valve sub-assembly.