Home › Engine / Hybrid System › 2TR-FE LUBRICATION › OIL PUMP
RM1880E _51 Engine / Hybrid System _013215 2TR-FE LUBRICATION _0068499 OIL PUMP A

2TR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP ROTOR SET

a.
A097981
0.854,0.896 0.458,0.229 0.458,0.229 0.979,0.823 true 0.24,0.115 0.458,0.292 0.219,0.177 10 false *1
*1 Alignment Mark


Coat the oil pump rotor set with engine oil and place it into the pump body with the marks facing outward (oil pump cover side). Check that the rotors revolve smoothly.


Hide 2.INSTALL OIL PUMP COVER

a.

Install the oil pump cover with the 7 bolts.

Torque:
8.9 N*m (91 kgf*cm, 79 in.*lbf)


Hide 3.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the relief valve with engine oil.


b.

Insert the relief valve and spring into the pump body hole.


c.

Install a new gasket to the plug.


d.

Using a 27 mm socket wrench, install the plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)