Home › Engine / Hybrid System › 2TR-FE STARTING › IGNITION SWITCH
RM1880E _51 Engine / Hybrid System _013216 2TR-FE STARTING _0068501 IGNITION SWITCH A

2TR-FE STARTING  IGNITION SWITCH  INSTALLATION  


PROCEDURE

Hide 1.INSTALL IGNITION SWITCH ASSEMBLY

a.

Attach the 2 claws and install the ignition switch assembly.


b.

Connect the connector.


Hide 2.INSTALL UPPER STEERING COLUMN COVER

Hide 3.INSTALL LOWER STEERING COLUMN COVER

a.

Install the lower cover with the 3 screws.

HINT:

Turn the steering wheel to the right and left as necessary to install the 3 screws and lower cover.