Home › Engine / Hybrid System › 2TR-FE STARTING › IGNITION SWITCH
RM1880E _51 Engine / Hybrid System _013216 2TR-FE STARTING _0068501 IGNITION SWITCH A

2TR-FE STARTING  IGNITION SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.REMOVE LOWER STEERING COLUMN COVER

A251397

a.

Remove the 3 screws and lower cover.

HINT:

Turn the steering wheel to the right and left as necessary to remove the 3 screws and lower cover.



Hide 2.REMOVE UPPER STEERING COLUMN COVER

Hide 3.REMOVE IGNITION SWITCH ASSEMBLY

A251405

a.

Disconnect the connector.


b.

Detach the 2 claws and remove the ignition switch assembly.