Home › Drivetrain › A343E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM
RM1880E _52 Drivetrain _013217 A343E AUTOMATIC TRANSMISSION / TRANSAXLE _0068504 AUTOMATIC TRANSMISSION SYSTEM U

A343E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  TERMINALS OF ECM  


CHECK ECM


C115871
1.344,0.042 1.698,0.26 0.354,0.219 2.813,0.042 3.167,0.26 0.354,0.219 5.656,0.042 6.01,0.26 0.354,0.219 4.292,0.042 4.646,0.26 0.354,0.219 1.396,0.083 1.76,0.302 0.365,0.219 10 false C75 2.865,0.083 3.208,0.344 0.344,0.26 10 false C76 5.698,0.083 6.115,0.333 0.417,0.25 10 false G89 4.333,0.083 4.708,0.323 0.375,0.24 10 false G88

HINT:

The standard voltage at each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspect. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G89-30 (NSW) - C75-3 (E1) L-Y - BR PNP switch signal
·

Ignition switch ON

·

Shift lever in P or N


Below 1 V
·

Ignition switch ON

·

Shift lever not in P or N


11 to 14 V
G88-11 (R) - C75-3 (E1) R-Y - BR R shift position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
G88-19 (3) - C75-3 (E1) G-O - BR 3 shift position switch signal
·

Ignition switch ON

·

Shift lever in 3


11 to 14 V
·

Ignition switch ON

·

Shift lever not in 3


Below 1 V
G88-10 (2) - C75-3 (E1) L - BR 2 shift position switch signal
·

Ignition switch ON

·

Shift lever in 2


11 to 14 V
·

Ignition switch ON

·

Shift lever not in 2


Below 1 V
G88-9 (L) - C75-3 (E1) G-R - BR L shift position switch signal
·

Ignition switch ON

·

Shift lever in L


11 to 14 V
·

Ignition switch ON

·

Shift lever not in L


Below 1 V
C76-9 (S1) - C75-3 (E1) B-W - BR S1 solenoid signal 1st or 2nd gear 11 to 14 V
3rd or 4th gear Below 1 V
C76-8 (S2) - C75-3 (E1) B-R - BR S2 solenoid signal 2nd or 3rd gear 11 to 14 V
1st or 4th gear Below 1 V
C76-12 (SLT+) - C76-13 (SLT-) B-L - B-Y SLT solenoid signal Engine idling Pulse generation
C76-11 (SL) - C75-3 (E1) L-Y - BR SL solenoid signal Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF) Pulse generation
(See waveform 1)
Vehicle driving under look-up condition 11 to 14 V
C75-22 (THOC) - C75-28 (E2) W-L - BR ATF temperature sensor signal ATF temperature: 115°C (239°F) or higher Below 1.5 V
C76-35 (SP2+) - C76-27 (SP2-) G - R Speed sensor SP2 signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 2)
C76-34 (NC0+) - C76-26 (NC0-) V - P Speed sensor NC0 signal Engine idling
(shift lever in P or N)
Pulse generation
(See waveform 3)
G88-8 (SPD) - C75-3 (E1) V-R - BR Speed signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 4)
G88-4 (STP) - C75-3 (E1) G-W - BR STP light switch signal
·

Ignition switch ON

·

Brake pedal is depressed


11 to 14 V
·

Ignition switch ON

·

Brake pedal is released


Below 1 V
G89-12 (STA) - C75-3 (E1) B-Y - BR Starter signal Cranking 6 V or more
G88-13 (SIL) - C75-3 (E1) R-Y - BR Terminal SIL of DLC3 Connect intelligent tester to DLC3 Pulse generation
G88-35 (WFSE) - C75-3 (E1) W - BR Terminal SIL of DLC3 Ignition switch ON 11 to 14 V

a.
C170572
2.479,0.854 3.135,1.198 0.656,0.344 10 false 10 V/DIV. 2.625,1.625 3,1.927 0.375,0.302 10 false GND 1.344,2.594 2.354,3 1.01,0.406 10 false 100 msec./DIV.

Using an oscilloscope, check waveform 1.

Reference
Terminal No. (Symbol) Tool Setting Condition
C76-11 (SL) - C75-3 (E1) 10 V/DIV., 100 msec./DIV. Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)


b.
C170571
2.479,0.854 3.083,1.229 0.604,0.375 10 false 2 V/DIV. 2.625,1.615 3.031,1.938 0.406,0.323 10 false GND 1.344,2.604 2.271,3.031 0.927,0.427 10 false 20 msec./DIV.

Using an oscilloscope, check waveform 2.

Reference
Terminal No. (Symbol) Tool Setting Condition
C76-35 (SP2+) - C76-27 (SP2-) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


c.
C170570
2.479,0.896 3.083,1.25 0.604,0.354 10 false 5 V/DIV. 2.625,1.625 3.042,2.01 0.417,0.385 10 false GND 1.344,2.594 2.313,3.021 0.969,0.427 10 false 0.5 msec./DIV.

Using an oscilloscope, check waveform 3.

Reference
Terminal No. (Symbol) Tool Setting Condition
C76-34 (NC0+) - C76-26 (NC0-) 5 V/DIV., 0.5 msec./DIV. Engine idling (shift lever in P or N)


d.
C170574
2.479,0.865 3.042,1.198 0.563,0.333 10 false 5 V/DIV. 2.625,1.833 3.031,2.208 0.406,0.375 10 false GND 1.344,2.594 2.323,3.01 0.979,0.417 10 false 20 msec./DIV.

Using an oscilloscope, check waveform 4.

Reference
Terminal No. (Symbol) Tool Setting Condition
G88-8 (SPD) - C75-3 (E1) 5 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)