Home › Drivetrain › A343E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION FLUID
RM1880E _52 Drivetrain _013217 A343E AUTOMATIC TRANSMISSION / TRANSAXLE _0068505 AUTOMATIC TRANSMISSION FLUID G

A343E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION FLUID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK TRANSMISSION FLUID LEVEL

HINT:

Drive the vehicle so that the engine and transmission are at normal operating temperature.


ATF temperature:

70 to 80°C (158 to 176°F)


a.
G036408
2.01,0.229 2.271,0.417 0.26,0.188 10 false *a 1.448,0.51 1.75,0.708 0.302,0.198 10 false *b
*a OK
*b Add


Park the vehicle on a level surface and set the parking brake.


b.

With the engine idling and the brake pedal depressed, move the shift lever into all positions from P to L. Then return it to P.


c.

Pull out the dipstick and wipe it clean.


d.

Push the dipstick back fully into the pipe.


e.

Pull the dipstick out and check that the fluid level is in the HOT range.

If there are leaks, it is necessary to repair or replace O-rings, FIPG, oil seals, plugs or other parts.