1.INSTALL SPEED SENSOR (SP2)
Coat a new O-ring with ATF and install it to the sensor.
Install the sensor with the bolt.
Connect the sensor connector.
2.INSTALL SPEEDOMETER SENSOR
Coat a new O-ring with ATF and install it to the sensor.
Install the speedometer driven gear to the sensor.
Insert the gear so that the grooves on the gear align with the protrusions inside the sensor.
Install the sensor with the bolt.
Connect the sensor connector.
3.INSTALL SPEED SENSOR (NC0)
Coat a new O-ring with ATF and install it to the sensor.
Install the speed with the bolt.
Connect the sensor connector.