Home › Drivetrain › A343E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY
RM1880E _52 Drivetrain _013217 A343E AUTOMATIC TRANSMISSION / TRANSAXLE _0068509 VALVE BODY ASSEMBLY A

A343E AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL TRANSMISSION SOLENOID ASSEMBLY

a.

Coat a new O-ring with ATF and install it to the shift solenoid valve SL.


b.

Install the shift solenoid valve SL with the bolt.

Torque:
9.8 N*m (100 kgf*cm, 87 ft.*lbf)


c.

Coat 2 new O-rings with ATF and install them to the shift solenoid valves (S1 and S2).


d.

Install the shift solenoid valves (S1 and S2) with the bolt.

Torque:
6.6 N*m (67 kgf*cm, 59 in.*lbf)


e.

Install the shift solenoid valve SLT with the plate and bolt.

Torque:
6.4 N*m (65 kgf*cm, 56 in.*lbf)