Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER
RM1880E _52 Drivetrain _013218 CLUTCH _0068521 CLUTCH RELEASE CYLINDER A

CLUTCH  CLUTCH RELEASE CYLINDER  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE CLUTCH RELEASE CYLINDER KIT

a.

Remove the clutch release cylinder boot together with the No. 1 clutch release cylinder push rod from the cylinder body.


b.

Remove the No. 1 clutch release cylinder push rod from the clutch release cylinder boot.


c.
C215485

Using compressed air, remove the release cylinder piston together with the spring from the cylinder body.

NOTICE:

Do not damage the inside of the cylinder body.



d.

Remove the spring from the piston.


e.

Remove the 2 cylinder cups from the piston.


Hide 2.REMOVE RELEASE CYLINDER BLEEDER PLUG

a.

Remove the bleeder plug cap from the bleeder plug.


b.

Remove the bleeder plug from the cylinder body.