Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY
RM1880E _52 Drivetrain _013220 DRIVE SHAFT / PROPELLER SHAFT _0068534 PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

a.
C282105
0.667,1.479 1.438,1.479 true 0.896,1.469 0.896,1.406 0.896,1.406 1.458,1.406 true 0.469,1.385 0.792,1.635 0.323,0.25 10 false *1
*1 Matchmark


Place matchmarks on the propeller shaft flange and differential flange.


b.

Remove the 4 nuts, 4 bolts and 4 washers and disconnect the propeller shaft.


c.
A098693

Remove the 2 bolts from the frame crossmember.


d.

Pull out the propeller shaft.


e.
C098710
1.958,0.135 1.885,0.135 1.885,0.135 1.615,0.281 false 2.01,0.052 2.583,0.417 0.573,0.365 10 false SST

Install SST to the extension housing to prevent oil leakage.

SST
09325-40010