Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM1880E _52 Drivetrain _013221 AXLE AND DIFFERENTIAL _0068540 REAR AXLE SHAFT G

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  INSPECTION  


PROCEDURE

Hide 1.INSPECT REAR AXLE SHAFT LH

a.
F050876

Using a dial indicator, measure the shaft runout and flange runout of the rear axle shaft.

Maximum runout:
Item Specified Condition
Shaft runout 1.5 mm (0.0591 in.)
Flange runout 0.10 mm (0.00394 in.)


If the rear axle shaft is damaged or worn, or if the runout is more than the maximum, replace the rear axle shaft.