Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM1880E _53 Suspension _013223 FRONT SUSPENSION _0068547 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH

HINT:

Use the same procedure for the other front shock absorber.


a.
F052450
2.198,0.115 2.51,0.396 0.313,0.281 10 false *a
*a Approximately 35 mm


Fully extend the shock absorber piston rod and fix the shock absorber in place at an angle in a vise or similar tool.


b.

Using a drill or similar tool, slowly make a hole approximately 35 mm (1.38 in.) from the top end of the shock absorber and discharge the gas inside of it.

NOTICE:
·

The gas is colorless, odorless and harmless.

·

Since the discharged gas may cause chips to fly off, cover the drill with a cloth when making a hole.