Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM1880E _53 Suspension _013224 REAR SUSPENSION _0068552 REAR SHOCK ABSORBER A

REAR SUSPENSION  REAR SHOCK ABSORBER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.REMOVE REAR SHOCK ABSORBER ASSEMBLY LH

C238293

a.

Support the axle housing.

i.

Jack up and support the vehicle's frame on stands.


ii.

Lower the axle housing until the coil spring tension is free, and maintain this position.



b.

Remove the nut and 2 retainers.


c.
C118720

Remove the 2 bolts.


d.

Disconnect the shock absorber and 2 bushes from the axle housing and frame.


e.

Remove the lock nut, bracket, 3 retainers and 2 cushions.