Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER
RM1880E _54 Brake _013227 BRAKE SYSTEM (OTHER) _0068567 BRAKE BOOSTER G

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK BRAKE BOOSTER ASSEMBLY

a.

Airtightness check.

i.
C132722
0.542,0.156 0.969,0.479 0.427,0.323 10 false *a 2.229,0.146 2.656,0.573 0.427,0.427 10 false *b 0.5,1.74 0.917,1.979 0.417,0.24 10 false 1st 0.802,1.635 1.188,1.917 0.385,0.281 10 false 2nd 1.115,1.531 1.51,1.76 0.396,0.229 10 false 3rd
*a CORRECT
*b INCORRECT


Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.

If the pedal can be depressed to the floor the first time, but cannot be depressed to the floor the second and third time, the booster is airtight.


ii.

Depress the brake pedal while the engine is running and stop the engine with the brake pedal depressed.

If there is no change in the pedal reserve distance while holding the pedal for 30 seconds, the booster is airtight.



b.
C128542

Operation check.

i.

Depress the brake pedal several times with the ignition switch off and check that there is no change in the pedal reserve distance when the pedal is depressed.


ii.

Depress and hold down the pedal, and then start the engine.

If the pedal goes down slightly, the operation is normal.