Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE
RM1880E _54 Brake _013228 BRAKE (FRONT) _0068570 FRONT BRAKE FLEXIBLE HOSE A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 3.REMOVE FRONT FLEXIBLE HOSE

a.
C133735

Remove the union bolt and gasket and disconnect the front flexible hose.


b.

Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting points.




c.

Remove the clip.


d.

Remove the bolt and front flexible hose from the absorber bracket.