Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH
RM1880E _54 Brake _013230 PARKING BRAKE _0068576 PARKING BRAKE SWITCH G

PARKING BRAKE  PARKING BRAKE SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.
C217121
3.26,1.969 3.417,2.167 0.156,0.198 10 false -
V100135

On
V100136

Off


Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Switch Condition Specified Condition
Switch connector terminal - Switch body On (Shaft is not pressed) Below 1 Ω
Off (Shaft is pressed) 10 kΩ or higher

If the result is not as specified, replace the parking brake switch assembly.