Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP
RM1880E _55 Steering _013231 POWER ASSIST SYSTEMS _0068578 VANE PUMP A

POWER ASSIST SYSTEMS  VANE PUMP  REMOVAL  


PROCEDURE

Hide 1.DRAIN POWER STEERING FLUID

Hide 3.DISCONNECT RETURN HOSE

a.
G038601

Detach the clip and disconnect the hose.


Hide 4.DISCONNECT PRESSURE FEED TUBE ASSEMBLY

a.
G038602

Remove the union bolt and disconnect the pressure feed tube from the vane pump.


b.

Remove the gasket from the pressure feed tube.


Hide 5.REMOVE VANE PUMP ASSEMBLY

a.
C281956

Disconnect the connector from the power steering oil pressure switch.


b.
G028304

Remove the 2 bolts and vane pump.


Hide 6.REMOVE VANE PUMP OIL RESERVOIR CAP SUB-ASSEMBLY

Hide 7.REMOVE VANE PUMP OIL RESERVOIR SUB-ASSEMBLY

a.

Remove the 3 bolts and oil reservoir from the front vane pump housing.


b.

Using a screwdriver, remove the O-ring from the oil reservoir.