1.REPAIR WINDOW GLASS ANTENNA WIRE
| *a | Repair Point |
| *b | Masking Tape |
| *c | Broken Wire |
Clean the broken wire tips with grease, wax and silicone remover.
Place masking tape along both sides of the wire to be repaired.
Thoroughly mix the repair agent.
No. 4817 or equivalent
| *a | Fine Tip Brush |
| *b | Repair Point |
Using a fine tip brush, apply a small amount of the agent to the wire.
After a few minutes, remove the masking tape.
Do not allow electricity to flow in the window glass antenna wire for at least 24 hours.