Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM1880E _56 Audio / Visual / Telematics _013234 AUDIO / VIDEO _0068594 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted  


CAUTION / NOTICE / HINT

HINT:

For vehicles equipped with an Extension Module, refer to optional equipment's manuals.


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the voice on the other side can be heard using the cellular phone.

OK:

The voice can be heard.



Result:
Proceed to
OK
NG



OK

2.CHECK AUDIO AND VISUAL SYSTEM

NG

CELLULAR PHONE IS FAULTY

2.CHECK AUDIO AND VISUAL SYSTEM
a.

Check that audio sound can be heard from the driver side speaker.

OK:

Audio sound can be heard.


HINT:

If audio sound cannot be heard, proceed to "No sound can be heard from speakers (Audio is mute)" in Problem Symptoms Table.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>PROBLEM SYMPTOMS TABLE



Result:
Proceed to
OK
NG



OK

3.CHECK SETTINGS

NG

3.CHECK SETTINGS
a.

Check that the received voice level setting on the radio and display receiver assembly is not too low.

i.

Press the "SETUP" switch.


ii.
E219363
0.094,0.052 0.427,0.313 0.333,0.26 10 false *a
*a Example


Touch the "Telephone" button and select the "Sound settings" to display the "Phone Sound Settings" screen.


iii.

Check that the "Call Volume" level is not too low.

OK:

"Call Volume" level is not too low.




b.

Check that the received voice level setting on the cellular phone is not too low.

OK:

The received voice level setting is not too low.



Result:
Proceed to
OK
NG



OK

NG

TURN VOLUME UP