Home › Power Source / Network › 2TR-FE BATTERY / CHARGING › CHARGING SYSTEM
RM1880E _57 Power Source / Network _013236 2TR-FE BATTERY / CHARGING _0068602 CHARGING SYSTEM L

2TR-FE BATTERY / CHARGING  CHARGING SYSTEM  PRECAUTION  


Check that the battery cables are connected to the correct terminals.



Disconnect the battery cables when the battery is given a quick charge.



Do not perform tests with a high voltage insulation resistance tester.



Never disconnect the battery while the engine is running.



Check that the charging cable nut is tightened on terminal B of the generator and the engine room relay block, junction block.