Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM1880E _58 Vehicle Interior _013237 DOOR LOCK _0068604 POWER DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  SYSTEM DESCRIPTION  


POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION


The power door lock control system locks/unlocks all the doors (including the back door).

The power window regulator master switch assembly (door control switch) sends lock/unlock request signals to the driver side junction block assembly. Then, the driver side junction block assembly sends these request signals to the door lock motors in each door to lock/unlock all the doors (including the back door) at once in response to the inputs. Operating the driver side door lock using a mechanical key sends request signals to lock or unlock the doors to the driver side junction block assembly.


FUNCTION OF MAIN COMPONENT


Component Function
Power window regulator master switch assembly Door control switch on the power window regulator master switch assembly locks or unlocks all doors (including the back door).
Front door courtesy light switch assembly LH/RH
Rear door courtesy light switch assembly LH/RH
Back door lock assembly (back door courtesy switch)
·

Located on each door.

·

Detects the door status (open or closed) and outputs data to the driver side junction block assembly.

·

Turns on when the door is opened and turns off when the door is closed.


Front door lock assembly LH*1
Front door lock assembly RH*2
·

Built-in motor locks or unlocks the door.

·

Built-in door control switch (key-linked) detects the door key cylinder operation status (locked or unlocked) and outputs a signal to the driver side junction block assembly.


Front door lock assembly RH*1
Front door lock assembly LH*2
Rear door lock assembly LH/RH
Back door lock assembly
Built-in motor locks or unlocks the door.
Front seat inner belt assembly LH*1
Front seat inner belt assembly RH*2
Informs the combination meter assembly of the driver side seat belt condition (fastened or unfastened).

*1: for LHD

*2: for RHD



SYSTEM FUNCTION


This system is controlled by the driver side junction block assembly. The driver side junction block assembly outputs signals to each door lock motor. The power door lock control system of the vehicle has the following functions:

Function Outline
Manual lock and unlock function This function locks and unlocks all doors (including the back door) according to the power window regulator master switch assembly (door control switch) operation.
Key-linked lock and unlock function This function, which is linked with the door key cylinder, locks or unlocks all doors (including the back door) when a lock or unlock operation is performed.
HINT:

This function will not operate when the driver side seat belt is fastened.


2 step unlock function*
·

Driver side door can be unlocked by pressing the transmitter's unlock switch once; remaining doors can be unlocked by pressing the transmitter's unlock switch a second time.

·

Driver side door can be unlocked by turning door key cylinder once; remaining doors can be unlocked by turning door key cylinder a second time.



*: w/ Theft Deterrent System