WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION
This system locks and unlocks the vehicle's doors remotely. The wireless door lock control system has the following features:
The door control receiver performs the code identification process and the driver side junction block assembly operates the door lock control. A serial data link is provided for communication between the door control receiver and driver side junction block assembly.
A key-integrated type transmitter is used and it contains the following 3 switches: the door lock switch, door unlock switch and alarm switch.
An LED is built into the transmitter so that the battery status can be checked.
FUNCTION OF MAIN COMPONENTS
| Components | Functions |
|---|---|
| Door control transmitter assembly | ·
Contains lock, unlock and alarm switches. ·
Transmits faint electric waves (recognition codes and function codes) to door control receiver. ·
Illuminates indicator light (LED) during transmission. |
| Unlock warning switch assembly | Detects if key is in ignition key cylinder or not. |
| Front door courtesy light switch assembly LH/RH
Rear door courtesy light switch assembly LH/RH Back door lock assembly (back door courtesy light switch) |
·
Located on each door. ·
Turns on when the door is open and off when the door is closed. Outputs the door status (open or closed) to the theft warning ECU assembly. |
| Front door lock assembly LH/RH
Rear door lock assembly LH/RH Back door lock assembly |
Built-in motor locks and unlocks the door. |
| Theft warning ECU assembly | Receives weak electric waves (recognition codes and function codes) from the door control receiver and changes the waves to code data. |
SYSTEM FUNCTION
The wireless door lock control system has the following functions.
| Function | Outline |
|---|---|
| All door lock function | Pressing lock switch locks all doors. |
| All door unlock function | Pressing unlock switch unlocks all doors. |
| Answer-back function* | ·
When the doors are locked by a wireless operation, the hazard warning lights and side turn signal lights flash once and the security horn assembly sounds once. ·
When the doors are unlocked by a wireless operation, the hazard warning lights flash and side turn signal lights twice and the security horn assembly sounds twice. |
| Remote alarm function | Pressing the alarm switch of the transmitter for more than approximately 0.8 seconds causes the following alarms to activate:
·
Sounds the horns. ·
Flashes the hazard warning lights, and side turn signal lights. |
| Automatic locking function | If no doors are opened within 30 seconds after they are unlocked by the door control transmitter assembly, all the doors lock again automatically. |
| Door ajar warning function | If any door is open or ajar, pressing the lock switch causes the security horn assembly to sound for approximately 10 seconds. |
| Illuminated entry function | ·
When the map light and No. 1 room light door switches are in the door position, and all the doors are locked, pressing the unlock switch causes the interior light illumination to turn on and all the doors to unlock simultaneously. ·
If the doors have not been opened, the interior light turns off after approximately 15 seconds. |
| 2 step unlock function | Driver side door can be unlocked by pressing the transmitter's unlock switch once; remaining doors can be unlocked by pressing the transmitter's unlock switch a second time. |
| Security function | Sends signal as rolling code. |
| Transmitter recognition code registration function | Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM, which is built into door control receiver. |
*: The security horn assembly applies only if thee wireless answer-back function has been customized so that the hazard warning lights and side turn signal lights flash and the security horn sounds.