Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM1880E _58 Vehicle Interior _013237 DOOR LOCK _0068610 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

E178151
1.667,3.083 2.469,3.083 false 0.552,3.083 1.333,3.083 false 0.25,3.0 0.656,3.188 0.406,0.188 10 UN- 2.51,3.0 2.917,3.208 0.406,0.208 10 UN+ 0.073,1.531 0.365,1.74 0.292,0.208 10 *c 1.396,0.052 2.208,0.302 0.813,0.25 10 *a 1.406,0.385 1.979,0.615 0.573,0.229 10 *b
*a Not Pushed
*b Pushed
*c Component without harness connected
(Unlock Warning Switch Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (UN+) - 2 (UN-) Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.