Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT
RM1880E _58 Vehicle Interior _013239 LIGHTING (INT) _0068626 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


PROCEDURE

Hide 1.INSPECT TRANSPONDER KEY AMPLIFIER

a.
E074066
1.448,1.24 1.26,1.563 true 1.99,1.229 2.135,1.531 true 0.052,0.052 0.25,0.208 0.198,0.156 10 *a 2.031,1.594 2.427,1.875 0.396,0.281 10 ILL+ 1.021,1.583 1.406,1.833 0.385,0.25 10 ILL-
*a Component without harness connected
(Transponder Key Amplifier)


Apply battery voltage to the connector and check the LED illumination.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (ILL+)
Battery negative (-) → Terminal 6 (ILL-)
LED illuminates


If the result is not as specified, replace the transponder key amplifier.