INSPECT INDICATOR/WARNING LIGHT
Check the following indicators and warning lights.
| Indicator/Warning Light | Switch Condition | Specified Condition |
|---|---|---|
| ABS warning light | Ignition switch off → ON | Comes on for 3 seconds |
| SPEED LIMIT indicator light* | ||
| SRS warning light | Ignition switch off → ON | Comes on for 6 seconds |
| CHARGE warning light | Ignition switch off → ON | ·
Illuminates when ignition switch turned to ON ·
Turns off when engine started |
| Oil pressure warning light | ||
| MIL |
*: for Middle East
INSPECT SPEEDOMETER
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / Data List.
| Tester Display |
|---|
| Vehicle Speed |
| Standard Indication | Acceptable Range |
|---|---|
| 20 km/h | 21 to 25 km/h |
| 40 km/h | 41.7 to 46.2 km/h |
| 60 km/h | 62.7 to 67.2 km/h |
| 80 km/h | 83.4 to 88.4 km/h |
| 100 km/h | 104.3 to 109.3 km/h |
| 120 km/h | 125.1 to 130.6 km/h |
| 140 km/h | 145.8 to 151.8 km/h |
| 160 km/h | 166.2 to 173.2 km/h |
| 180 km/h | 186.9 to 194.5 km/h |
If the result is not as specified, the speedometer may have a malfunction.
Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.
Check the deflection width of the speedometer indicator.
Within 0.3°
INSPECT TACHOMETER
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / Data List.
| Tester Display |
|---|
| Engine Speed |
| Standard Indication (rpm) | Acceptable Range
Data in ( ) is for Reference |
|---|---|
| 700 | 630 to 770 |
| 1000 | (900 to 1100) |
| 2000 | (1850 to 2150) |
| 3000 | 2800 to 3200 |
| 4000 | (3800 to 4200) |
| 5000 | 4800 to 5200 |
| 6000 | (5750 to 6250) |
| 7000 | 6700 to 7300 |
If the result is not as specified, the tachometer may have a malfunction.