Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)
RM1880E _58 Vehicle Interior _013243 SEAT _0068644 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.REMOVE REAR SEAT CUSHION HINGE COVER LH

a.
B277313

Using a clip remover, remove the clip.

HINT:

Tape the clip remover tip before use.



b.

Detach the claw, guide and remove the rear seat cushion hinge cover LH.


Hide 2.REMOVE REAR SEAT CUSHION HINGE COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 3.REMOVE REAR NO. 1 SEAT ASSEMBLY LH

a.
B279307

Operate the No. 1 reclining adjuster release handle LH and fold down the rear No. 1 seatback.


b.

Remove the 2 bolts.


c.

Operate the rear seat lock assembly LH and tumble the rear No. 1 seat assembly.


d.
B279308

Remove the 2 nuts and rear No. 1 seat assembly LH from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.