Wear protective gloves. Sharp areas on the parts may injure your hands.
1.REMOVE REAR SEAT CUSHION HINGE COVER LH
Using a clip remover, remove the clip.
Tape the clip remover tip before use.
Detach the claw, guide and remove the rear seat cushion hinge cover LH.
2.REMOVE REAR SEAT CUSHION HINGE COVER RH
Use the same procedure described for the LH side.
3.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
Operate the reclining adjuster release handle RH and fold down the rear No. 1 seatback.
Remove the 2 bolts.
Operate the rear seat lock assembly RH and tumble the rear No. 1 seat assembly RH.
Remove the 2 nuts and rear No. 1 seat assembly RH from the vehicle.
Be careful not to damage the vehicle body.